Coolant Heated Handlebars

3 Way Handlebar Plumbing Kit

3 Way Valve / Bypass / Handlebar Plumbing Kit Single 3 way valve for coolant heated handlebar constant on or off bypass 180 Degree Valve adjustment for Coolant Heated Bar Heat There are two ways to mount this bypass valve: Top Mount: Fits...

Straight, AN Male to 1/8 in NPT Male

  Fitting, Adapter, Straight, 4 AN Male to 1/8 in NPT Male, Aluminum, Black Anodized, Each   Alternate Description AN TO NPT STRAIGHT -4 X 1/8IN

Straight, 4 AN Male to 1/4 in NPT Male

  Fitting, Adapter, Straight, 4 AN Male to 1/4 in NPT Male, Aluminum, Black Anodized, Each   Alternate Description AN TO NPT STRAIGHT -4 X 1/4IN

Hard Enduro Cheetah Factory Racing Coolant Heated Handlebar Kit

CFR- Cheetah Factory Racing Basic Coolant Heated Handlebar Kit SELKIRK Coolant heated handlebar features:  1 1/8” clamp diameter (requires oversized bar mounts) Reliable, adjustable heat integrated into cooling system Completely...

Handguard Bundle KTM/Husky/Gas Gas

BUNDLE & SAVE with ZETA! Finish off your Handlebars with the necessary Hand Protection! Fits  KTM, Husqvarna & Gas Gas only This package includes: Extra large Zeta Armor-Guard XC-Pro Handguards ZETA ARMOR HANDGUARDS...

CFR- Cheetah Factory Racing Complete Coolant Heated Handlebar & Engine Management Package for use with Selkirk Engine Armor

The Complete Coolant Heated Bar Kit is only needed if you have Selkirk Engine Armor because it comes with a secondary bypass.If you do not have Engine Armor you do not need the secondary bypass, please purchase the Basic Coolant Heated Bars CFR- Cheetah...

SX BAR Rise-Cheetah Factory Racing Coolant Heated Handlebar Kit

CFR- Cheetah Factory Racing Basic Coolant Heated Handlebar Kit The SX Bar is CFR's First Snowbike Handlebar. The New SX Snowbike Handlebar was Tested and Approved by Cory Derpak & the MAG Silver Star Team. Coolant heated handlebars  1...

Complete Coolant Heated Handlebar & Engine Management Package for use with Selkirk Engine Armor

The Complete Coolant Heated Bar Kit is only needed if you have Selkirk Engine Armor because it comes with a secondary bypass.If you do not have Engine Armor you do not need the secondary bypass, please purchase the Basic Coolant Heated...

Extra large Zeta Armor-Guard XC-Pro Handguards

Extra large Zeta Armor-Guard XC-Pro Handshields Extra large Zeta Armor-Guard Shields for the Zeta Armor Handguards. The XC-Pro Shields offer the most coverage for Armor Handguards and are therefore perfect for enduro racing...

Selkirk Coolant Heated Bar Plumbing

Selkirk Coolant Heated Bar Plumbing We use Aircraft quality -4 AN Teflon hose and fittings, 1/8 NPT port. 1 each 12", 15", 30" Coated Braided Line's Our Coolant Heated Bar Plumbing is for the do it yourself guy or if you are looking to UPGRADE...

ProTaper Universal Bar Clamp

ProTaper Universal Solid Mount Kit Adapts solid mounted triple clamp bar mounts from 7/8" to 1-1/8" Bolts to stock 7/8" solid-mounted handlebar mounts and allows them to accept 1-1/8" handlebars and adds 3/4" rise. Most Honda and Kawasaki bikes need...

Coated Braided Lines

Coated Braided Lines #4 Hose -4 Straight/-4 Straight Black coated braided steel lines have black aluminum ends.

45 Degree, 4 AN Male to 1/8 in NPT Male

  Fitting, Adapter, 45 Degree, 4 AN Male to 1/8 in NPT Male, Aluminum, Black Anodized, Each   Alternate Description AN TO NPT 45 DEGREE -4 X 1/8IN

90 Degree, 4 AN Male to 1/8 in NPT Male

Fitting, Adapter, 90 Degree, 4 AN Male to 1/8 in NPT Male, Aluminum, Black Anodized, Each   Alternate Description AN TO NPT 90 DEGREE -4 X 1/8IN

90 Degree, 4 AN Male to 1/4 in NPT Male

Fitting, Adapter, 90 Degree, 4 AN Male to 1/4 in NPT Male, Aluminum, Black Anodized, Each

Zeta Handguard Bar Clamp Mount KTM / Husqvarna

Zeta Handguard Bar Clamp Mount KTM / Husqvarna Black  This is a universal fit part; it may or may not fit without modification. Replaces top half of OEM handlebar mounts on KTM and Husqvarna bikes. Provides more robust inward mounting points...

Female Pipe Tee 1/8"

1/8" Black

Pipe Couple

1/8" x 1/8" NPT Black

ZETA ARMOR HANDGUARDS BEND 1-1/8"

ZETA ARMOR HANDGUARDS BEND  1-1/8" The shortest path between two points is a straight line. Zeta Armor Guards take the squiggly fun route. The sweeping contour exits your bar end at a downward slope to cause less of an interference with the...

Miniature Manual Ball Valve: 1/8″ Pipe Female/Female

Miniature Manual Ball Valve: 1/8″ Pipe FNPT x FNPT Red Tab   Specifications Type Miniature Ball Valve Valve Type Miniature Ball Valve Pipe Size 1/8 Body Material Brass End Connection FNPT x...

Fitting Kit for C3 or other 1/8 NPT Thermostat--

Needed if using a C3 or other 1/8 NPT port thermostat Brass Fittings          

Miniature Manual Ball Valve: 1/4″ Pipe Male/Female

Miniature Manual Ball Valve: 1/4″ Pipe Male/Female Type Miniature Ball Valve Valve Type Miniature Ball Valve Pipe Size 1/4 Body Material Brass End Connection MNPT x FNPT Handle Type Wedge Trim...

Fitting Kit for C3 or other 1/8 NPT Thermostat

Needed only if you have a C3 Thermostat or another thermostat with 1/8 NPT ports, you will need this fittings upgrade kit to plumb our Selkirk Engine Armor with NO Coolant Heated Bars  

ZETA ARMOR HAND GUARD W/U-CLAMP 1-1/8 IN BLACK

ZETA ARMOR HAND GUARD W/U-CLAMP 1-1/8 IN BLACK   Features: The best to use this hand guard for KTM and Husqvarna or other models which uses hydraulic clutch master cylinder. Armor hand guard comes with U clamp bar mount. U shape handlebar...

ZETA U CLAMP KIT 1 1/8"

ZETA U CLAMP KIT 1 1/8"   Features: U shape armor handguard bar mount kit. Unique U shape design clamp does not touch clutch cable / oil line or brake line. Made of durable aluminum, available in 2 different size clamps, 1 1/8” and...

Zeta Riser Kit For 1 1/8" Handlebar

Zeta Riser Kit For 1 1/8" Handlebar 30MM Made of A7009-T6 aluminumUniversal bar riser kit for oversized 1 1/8" (28.6mm) bar mountProvide 30mm higher height bar position than stock bar positionFor use on dirt bikes and ATVs   Weight 0...

ProTaper® Clamp-On Full Diamond Grips

ProTaper® Clamp-On Full Diamond Grips Using the latest in grip technology and molding techniques, the Clamp-On Grip System offers the comfort and control of traditional grips with the added advantage of quick, effortless installation. A design...

ODI ROGUE MX LOCK-ON GRIP BLACK

Description:The V2 Lock On System eliminates the need for wire and glue. Utilizing an OE spec throttle tube with a Snap On Cam System, the grip comes molded directly to the plastic tube. Simply replace the grip as you would the entire throttle tube...

CFR SX Coolant Heated Handlebar only

CFR SX Coolant Heated Handlebar only with no plumbing Drilled and tapped, ready for you to add your own plumbing   The SX Bar packs our years of experience and industry leading technologies into our first snowbike specific handlebar and was...

ProTaper Clamp-On Half-Waffle Grips Black

Black Using the latest in grip technology and molding techniques, the Clamp-On Grip System offers the comfort and control of traditional grips with the added advantage of quick, effortless installation. A design that eliminates the need for glue and...

MX HALF WAFFLE LOCK ON GRIP BLACK

Lock On Grips  Random Manufacturer. Will be Black or Black and Gray Picture for reference, product will vary